High Power! Digital Capability! Power to Go Anywhere!
Optional digital unit, UT-118
The optional UT-118 provides D-STAR format digital voice and slow data communiation. The UT-118 includes the following digital features.
Callsign calling
In the digital mode, your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory.
Position exchange with external GPS receiver
When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible.
* NMEA 0183 output and RS-232C interface are required.
** Position mapping software required (Not supplied by Icom ).
And more digital features
20-character short data message
- Digital code squelch
- EMR communication
- Digital pocket beep
- Stand-by beep
7W powerful output power
A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time.
* 5W for UHF.
200 memory channels and 10 memory banks
Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting blank links.
Built-in CTCSS/DTCS
Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency.
Other features
- NOAA weather channel receive*
*USA version only
- Automatic repeater function*
*IC-82 USA version only
- Reversible control knob and up/down buttons assignment
- Durable construction and simple operation
- 16 DTMF dial memory
- PC cloning capability
Specifications
| General |
|
Frequency Coverage
(unit: MHz)
|
| Version |
IC-V82 |
IC-U82 |
| USA |
Tx 144-148
Rx 136-174*1
|
Tx 420-450*2
Rx 400-479*2
|
| Europe |
144–146 |
430–440 |
Guaranteed Range *1 144-148MHz, *2 440-450MHz |
| Mode |
F3E, F2D, F7W*
*Optional UT-118 Required |
| Number of memory Ch. |
207 (incl. 6 scan edges and 1 call) |
| Operating Temp. Range |
-10°C to +60°C; +14°F to +140°F |
| Frequency stability |
±2.5 ppm (-10°C to 60°C) |
| Power supply requirement |
7.2V DC
(6.0-10.3V DC aceptable; Icom's battery pack only)
|
|
Current drain
(at 7.2V DC)
|
| |
IC-V82 |
IC-U82 |
| Tx |
High (7W/5W) |
2.6A |
2.0A |
| Rx |
Max. audio Standby
Power Save |
250mA
80mA
30mA
|
250mA
80mA
30mA
|
|
| Antenna impedance |
50Ω (BNC) |
| Dimensions (W×H×D) (Projections not included) |
54 × 139 × 37.5 mm;
21/8 × 515/32 × 17/16 in
|
| Weight (approx.) |
390g; 13.8oz (w/ant. and BP-222N) |
| Transmitter |
Output power (at 7.2V DC)
IC-V82
IC-U82
|
7.0/4.0/0.5W (High/mid/low)
5.0/2.0/0.5W (High/mid/low)
|
| Spurious emissions |
Less than -60dBc |
| Max. freq. deviation |
±5.0/±2.5kHz (Wide/narrow) |
| External Microphone connector |
3-conductor 2.5(d)mm (1/10") / 2.2kΩ |
| Receiver |
| Receive system |
Double conversion superheterodyne |
| Intermediate freq. |
46.35MHz/450kHz (1st/2nd) |
| Sensitivity (typical) |
0.16µV (typ.; at 12dB SINAD) |
| Squelch sensitivity |
0.11µV (typ.; threshold) |
| Selectivity |
More than 55/50dB (wide/narrow) |
| Intermodulation |
65dB (typ.) |
| Spurious and image rejection |
80dB (typ.; VHF)
70dB (typ.; UHF)
|
| Audio output power |
300mW with an 8Ω load |
| Ext. speaker connector |
3-connector 3.5(d) mm (1/8”) / 8Ω |
| Ext. Data connector |
3-connector 2.5(d) mm (1/10”) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Battery case or battery pack*
- Desktop charger*
- Antenna
- Belt clip
Options
- Battery Case and Battery Packs
| MODEL |
BP-208N |
BP-209N |
BP-210N |
BP-211N |
BP-222N |
| Type |
6×AA(LR6 |
Ni-cd |
Ni-MH |
Li-Ion |
Ni-cd |
| V/Ah |
— |
7.2V / 1100mAh |
7.2V / 1650mAh |
7.4V / 1800mAh |
7.2V / 600mAh |
| Batery Life |
— |
3 h 40 min |
7 h |
8 h 15 min |
2 h 50 min |
Battery life is approx. time.; Tx (Hi): Rx: standby=1:1:8 power save function when set at auto
- BC-146 DESKTOP CHARGER + BC-147A/E AC ADAPTER
Charges the battery pack, BP-209N, BP-210N or BP-222N with/without transceiver in 12, 18.5, 6.5 hours (approx.), respectively. The BC-147 AC ADAPTER is additionally required. Cannot charge Li-Ion battery pack, BP-211N.
- BC-144N + DESKTOP CHARGER + BC-145A/E/V AC ADAPTER
For rapid charging of battery pack, BP-209N, BP-210N or BP-222N. An AC adapter, BC-145, is supplied with the charger depending on version. Cannot charge Li-Ion battery pack, BP-211N. Charging time: 1.5 to 2 hours. BC-119 is also available for rapid charging.
- BC-121 DESKTOP CHARGER +
AD-101 DESKTOP CHARGER ADAPTER + BC-124 AC ADAPTER
For rapid charging of up to 6 battery packs (including BP-211N). An AC adapter, BC-124, may be supplied, depending on version. Charging time: 1.5 to 2 hours. Six AD-101s are required.
- HM-75A SPEAKER-MICROPHONE
Allows you to remotely select operating channels, etc., according to cloning
- HM-131L SPEAKER-MICROPHONE
Compact and durable body. Equipped with an earphone jack and a revolving clip.
- HM-128L SPEAKER-MICROPHONE
Lightweight earphone-microphone.
- HS-94 HEADSET
Earhook headset with flexible boom microphone.
- HS-95 HEADSET
Behind-the-head headset with flexible boom microphone.
- HS-97 HEADSET
Throat microphone fits around your neck and picks up speech vibration.
- VS-1L PTT/VOX UNIT
Required when using these headsets with the transceiver.
- HS-85 HEADSET
For hands-free operation. Includes VOX, PTTand “one-touch” PTTwith atime-out timer.
- MB-86 BELT CLIP
Alligator type clip. Same as supplied.
- MB-103 BELT CLIP
Swivel belt clip.
- UT-108 DTMF DECODER
Provides DTMF decode capability with code squelch and pager operation
- UT-118 DIGITAL UNIT
Without voice scrambler
- CS-V82 + CLONING SOFTWARE + OPC-478/U CLONING CABLE
Provides quick and easy programming of memory channel, names, etc. OPC-478U is USB cable type.
- OPC-474 CLONING CABLE
Used for handheld-to-handheld data cloning.
- SP-13 EARPHONE
Provides clear audio in noisy environments.
